Winston Lawrence

KD2WLL - Amateur Radio Notes

Yaesu FT3D Operation with Pi-star hotspot or System Fusion repeater


FT3D Operations

  • YSF, FCS, XLX node/room - how to disconnect:

    1. If you DO NOT want to QSO with the node/room that is displayed as a solid, non-flashing entry then you need to disconnect the node/room. Again if the node/room is flashing then you don't need to do anything as you are not connected.
    2. Press and hold for a second or two the [band key] until you hear the disconnect tone. You should see "not connected" flash on the FT3D display and then the node/room should now be blinking which means that the FT3D is no longer connected.

'73 KD2WLL